However, with a bit of luck, it is possible to unload the sculptures without bad surprises.

... or if I rise the temperature too quickly at the beginning of the finring ...

But, .... if I didn't organise well enough the sculptures in the kiln during loading ...

And a long day of cooling follows, before the temperature is low enough to open the kiln with limited risks.

.... without forgetting the fusible device (up on the right side) which indicates the end of the firing.

Then I turn on the firing, extremely slowly at first, and it lasts around 13 to 15 hours, so that the temperature rises 1240 to 1290 °C.

When it is dry enough, I load my gas kiln (4 gas burners, about 450 liters load).

I sometimes add some pots or bowls to better fill the kiln, in order to optimise the burning gas....

Workshop and Technics - Firing